BP Custom Creations
BP Custom Creations
  • Видео 57
  • Просмотров 783 083
Sculpting, Molding, and Casting my first figure | Daruma
I finally tried my hand at traditionally sculpting in Chavant oil based clay for molding and resin casting. I learned a lot along the way so come along and see how it went.
Let me know what you thought of the process and the results.
The Crafsman: @TheCrafsMan
Robert Tolone: @RobertTolone
Qidi Tech Q1 Pro: qidi3d.com/products/q1-pro-3d-printer?sca_ref=5365167.en6FL22xV9
Check out my Patreon if you want to help support the channel: www.patreon.com/BPCustomCreations
Buy me a ko-fi:ko-fi.com/bpcustomcreations
You can also support the channel through paypal:www.paypal.me/BPCustomCreations
Useful tools and materials:Liquitex modelling paste amzn.to/3vN5KpV
My favorite printing resin amzn.to/3TFO06t
P...
Просмотров: 1

Видео

I made a ROBOT diorama from a box of JUNK | Silva Challenge
Просмотров 11 тыс.14 дней назад
This is a long-overdue video of my finished Silva challenge build! The robot was made from a box of junk and the concrete parts were an idea I've been kicking around for a couple years. @JimSilva-SilvaDiecastCustoms Qidi Tech Q1 Pro: qidi3d.com/products/q1-pro-3d-printer?sca_ref=5365167.en6FL22xV9 Liquitex modelling paste: amzn.to/3vN5KpV Check out my Patreon if you want to help support the cha...
I made a TONK MECH from an illustration
Просмотров 6 тыс.Месяц назад
This is a 3D model for the game TONKS, or just for fun. It was a blast to make and bring to life. Let me know what you think! I listed the 3D file: cults3d.com/en/3d-model/game/rotating-tonk-mech-for-tabletop-games All of my shared files are also available on my Patreon page: www.patreon.com/BPCustomCreations Qidi Tech Q1 Pro: qidi3d.com/products/q1-pro-3d-printer?sca_ref=5365167.en6FL22xV9 Liq...
I made a CYBERPUNK flying vehicle from bits and pieces | Cyber Streets #3
Просмотров 7 тыс.3 месяца назад
I made a vehicle for my Cyber Streets diorama project. It was a great challenge to kitbash and scratchbuild at a small scale again. Let me know what you think! Qidi Tech Q1 Pro: qidi3d.com/products/q1-pro-3d-printer?sca_ref=5365167.en6FL22xV9 Liquitex modelling paste: amzn.to/3vN5KpV Holbein Super Opaque Black Ink: amzn.to/43UyGJd Elegoo Rapid PLA filament: amzn.to/3TUwHQA Check out my Patreon ...
I made a life size baby T-REX | Qidi Tech Q1 Pro
Просмотров 3,8 тыс.4 месяца назад
I spent the last month and a bit printing a baby T-Rex using the new FDM printer from Qidi Tech: the Q1 Pro. I found a great new coating for this kind of 3D print and the finished skeleton is massive! Check out the printer and other things I've used in the video: Qidi Tech Q1 Pro: qidi3d.com/products/q1-pro-3d-printer?sca_ref=5365167.en6FL22xV9Liquitex modelling paste: amzn.to/3vN5KpVHolbein Su...
I made a light-up landing pad on a cyberpunk building | Cyberstreets Diorama Building #2
Просмотров 4 тыс.5 месяцев назад
Building #2 of the cyber streets diorama. More to come! Qidi Tech X-Plus 3 printer (affiliate): qidi3d.com/products/qidi-x-plus-3?sca_ref=5365167.en6FL22xV9 Check out my Patreon if you want to help support the channel: www.patreon.com/BPCustomCreations Buy me a ko-fi: ko-fi.com/bpcustomcreations You can also support the channel through paypal: www.paypal.me/BPCustomCreations Useful tools and ma...
I made a SCI-FI BLASTER from a dollar store toy | propmaking
Просмотров 128 тыс.6 месяцев назад
In this video I show you how I took a dollar store Nerf gun style toy and make it into a custom sci-fi prop. Let me know what you think! Check out my Patreon if you want to help support the channel: www.patreon.com/BPCustomCreations Buy me a ko-fi: ko-fi.com/bpcustomcreations You can also support the channel through paypal: www.paypal.me/BPCustomCreations Check out The Qidi Tech X-Plus 3 printe...
I made a sci-fi DIORAMA and a short story! | Qidi Tech X Plus 3
Просмотров 3,1 тыс.7 месяцев назад
Watch me make a diorama and a short story with lots of 3D design and 3D printing. I modeled all the parts and it's almost entirely printed on the Qidi Tech X-Plus 3. What do you think? BRAND NEW Q1 Pro: qidi3d.com/products/q1-pro-3d-printer?sca_ref=5365167.en6FL22xV9 Check out the Qidi Tech X-Plus 3 printer here: qidi3d.com/products/qidi-x-plus-3?sca_ref=5365167.en6FL22xV9 Print our own spiky l...
I built a CYBERPUNK building from scratch | Cyber Streets
Просмотров 10 тыс.8 месяцев назад
Building #1 of the cyber streets diorama. More to come! skulldroid: cults3d.com/en/3d-model/game/skulldroid s.echor: s.echor Lazy Forger: www.myminifactory.com/frontier/full-spectrum-dominance-the-second-wave-2258 Check out my Patreon if you want to help support the channel: www.patreon.com/BPCustomCreations Buy me a ko-fi: ko-fi.com/bpcustomcreations You can also support the cha...
I made a MONSTER DIORAMA | Monster Bash V
Просмотров 4,8 тыс.9 месяцев назад
This is my entry into the Monster Bash for 2023. Let me know what you think! Check out the other awesome builders: ruclips.net/p/PL3n7rkAbz9QCD5W9pw4C_Vk_9MhhVUT6q Check out my Patreon if you want to help support the channel: www.patreon.com/BPCustomCreations Buy me a ko-fi: ko-fi.com/bpcustomcreations You can also support the channel through paypal: www.paypal.me/BPCustomCreations Useful tools...
I made and painted a FROG MECH figure!
Просмотров 3 тыс.10 месяцев назад
I found a cool illustration of this froggy robot character from Yahya Rushdan on Instagram. ( yahyarushdan) Modeled completely in Blender and then printed and painted it to match. Let me know what you think! Check out my Patreon if you want to help support the channel: www.patreon.com/BPCustomCreations Buy me a ko-fi: ko-fi.com/bpcustomcreations You can also support the channel th...
I made a Lava Monster Attacking this Diorama
Просмотров 5 тыс.11 месяцев назад
I saw some miniature bases painted like lava and thought I'd try to recreate the effect in a diorama. What better way than to have a lava monster attack! Let me know what you think of the final results. The Lazy Forger vehicles: www.myminifactory.com/object/3d-print-the-enlisted-army-bundle-228787 Yasashii Kyojin Bulette: www.myminifactory.com/object/3d-print-bursting-bulette-book-of-beasts-tab...
Making MECHA BEETLE Crawlers | Custom Diecast Volkswagen
Просмотров 51 тыс.Год назад
I really love these robot legs by the lazy forger and they just so happen to fit perfectly on hotwheels cars! A simple, fun, and refreshing diecast build. legs from @thelazyforger (part of a set): www.myminifactory.com/object/3d-print-the-tech-plato-class-land-crawler-166767 decals from Sabi Hobby: SabiHobby/ Check out my Patreon if you want to help support the channel: www.patreon...
Printing and Painting FOSSILS | Sabertooth Tiger (Smilodon)
Просмотров 6 тыс.Год назад
I've been getting more interested in printing and painting fossil replicas due to the low cost and very acceptable results. In this video I show you how to do to different paint jobs for fossil Smilodon skulls. Download my Mad Max Buzzard files: cults3d.com/en/3d-model/game/mad-max-buzzard-style-car-for-gaslands-and-tabletop-rpgs Download Makerbot's sabertooth skull: cults3d.com/en/3d-model/gam...
making my BIGGEST scratch bash robot DIORAMA yet! | collaboration with @gameyybuilds
Просмотров 15 тыс.Год назад
A robot, er.. mech, from trash, well toys and other bits, but you get the idea. This was a huge undertaking and a great challenge for all of my skills. I learned a lot this time and some new techniques I want to try again in the future. Let me know what you think in the comments! Check out Eric's channel @gameyybuilds Check out my Patreon if you want to help support the channel:www.patreon.com/...
Making a custom art toy figure | Collab with @DRToysCreations
Просмотров 4,1 тыс.Год назад
Making a custom art toy figure | Collab with @DRToysCreations
I made this Plague Doctor Buggy and YOU can too!
Просмотров 3,5 тыс.Год назад
I made this Plague Doctor Buggy and YOU can too!
Making a flying car from a VW Beetle Pickup | Hotwheels Custom
Просмотров 9 тыс.Год назад
Making a flying car from a VW Beetle Pickup | Hotwheels Custom
Custom Off-road Jeep mini Diorama | Scratch building and 3D modelling
Просмотров 6 тыс.Год назад
Custom Off-road Jeep mini Diorama | Scratch building and 3D modelling
I built a BETTER ship from scratch and other bits! | Inspired by the models of The Lazy Forger
Просмотров 8 тыс.Год назад
I built a BETTER ship from scratch and other bits! | Inspired by the models of The Lazy Forger
I made a diorama from the NETFLIX show DARK
Просмотров 4,5 тыс.Год назад
I made a diorama from the NETFLIX show DARK
My first experience at a maker's event in JAPAN
Просмотров 1,6 тыс.Год назад
My first experience at a maker's event in JAPAN
I made a SCI-FI HORROR diorama
Просмотров 10 тыс.Год назад
I made a SCI-FI HORROR diorama
I made a proper Chicken Walker with custom 3D modeled legs
Просмотров 3,7 тыс.Год назад
I made a proper Chicken Walker with custom 3D modeled legs
Making a PUMPKIN DIORAMA from chick peas | DnD scale craft
Просмотров 3 тыс.Год назад
Making a PUMPKIN DIORAMA from chick peas | DnD scale craft
Capturing MAGIC in mini DIORAMA | making mini cloche curiosities
Просмотров 55 тыс.Год назад
Capturing MAGIC in mini DIORAMA | making mini cloche curiosities
I fixed the TESLA Cybertruck! | Scifi garbage truck
Просмотров 4,8 тыс.Год назад
I fixed the TESLA Cybertruck! | Scifi garbage truck
I built a CYBERPUNK convertible! With a doggo!
Просмотров 4,3 тыс.2 года назад
I built a CYBERPUNK convertible! With a doggo!
I built a robot vending machine from scratch! | meet VENDY
Просмотров 10 тыс.2 года назад
I built a robot vending machine from scratch! | meet VENDY
Testing out home made flocking with a mushroom diorama
Просмотров 3,5 тыс.2 года назад
Testing out home made flocking with a mushroom diorama

Комментарии

  • @NatalieMcLendon
    @NatalieMcLendon 8 часов назад

    BP 🙋‍♀️

  • @manuelmenendez3118
    @manuelmenendez3118 21 час назад

    "What's better than white stripes?" -- The Raconteurs

    • @BPCustomCreations
      @BPCustomCreations 19 часов назад

      You're the first person to get that reference 😂

  • @ricks5756
    @ricks5756 День назад

    I wonder if ScratchBashing and StudsonStudio are doing the same challenge. Would be fun to see what everyone comes up with ^-^

    • @BPCustomCreations
      @BPCustomCreations День назад

      While that would be pretty cool to see, Jim's and my channel are pretty small potatoes on RUclips and this kind of thing wouldn't be on their radar

  • @Ernzt8
    @Ernzt8 День назад

    Very cool dio! Love the concrete

  • @GatchamanG4
    @GatchamanG4 2 дня назад

    Outstanding!! Love the creativity. ♥️👍🖖

    • @BPCustomCreations
      @BPCustomCreations 2 дня назад

      Thank you! I need to make another scratch built ship soon I think 🤔

    • @GatchamanG4
      @GatchamanG4 2 дня назад

      @@BPCustomCreations can't wait! ♥️👍

  • @dirgantara624
    @dirgantara624 2 дня назад

    That's boxes of treasure 😅

  • @dirgantara624
    @dirgantara624 2 дня назад

    Ijin subscribe ya 😊

  • @TheBuildingSite
    @TheBuildingSite 3 дня назад

    Fantastic build! And a really good short story! 🤩

  • @nicolazitarosa4846
    @nicolazitarosa4846 3 дня назад

    👏👏👏👏

  • @DavesEmpire1981
    @DavesEmpire1981 3 дня назад

    Really interesting. I never would have thought of doing most of that.

    • @BPCustomCreations
      @BPCustomCreations 3 дня назад

      Thanks! I've done most of this except for the cracked plaster for the past few years. You start to see the shapes and bits in everything 😂

  • @MsVynette
    @MsVynette 4 дня назад

    Wow, such insight and imagination ! Well done.

  • @echodelta2426
    @echodelta2426 4 дня назад

    This really turned out quite excellent!

  • @jeffholt9437
    @jeffholt9437 5 дней назад

    Love the fractured concrete technique but how do you stop the plaster from falling off of the foam, once you've achieved the desired effect (currently on my second attept!)?

    • @BPCustomCreations
      @BPCustomCreations 5 дней назад

      Oh no! You have to glue it on. Water down some PVA glue and dribble all over in the cracks so it gets down underneath. Spraying some isopropyl alcohol over the surface will allow the watered down glue to penetrate

    • @jeffholt9437
      @jeffholt9437 5 дней назад

      @@BPCustomCreations 👍

  • @earlware4322
    @earlware4322 5 дней назад

    Spectacular diorama sir!! It blows my mind to see what you did with those HW cars and tandom junk bits. That robot is fan-freaking-tastic! The road base and that guardrail (😱) is amazing. Just one question...What happened to the dude's feet? Was the impact that powerful that it blew them clean off or did he originally walk around on those two stumps??

    • @BPCustomCreations
      @BPCustomCreations 5 дней назад

      I spent multiple hours making feet and trying to figure that part out and I actually just decided to stop 😅 it's the one part of the diorama that isn't done to my satisfaction but I was mentally done with the project. It's kind of how my brain works 🤷🏼‍♂️

    • @earlware4322
      @earlware4322 4 дня назад

      @@BPCustomCreations I get it, sometimes we can be our own worst critics. I've had to box up and put away many a project because of one little thing that I didn't think was right. I only noticed the feet, or lack thereof, after finishing the video and was looking at the thumbnail again when my CDO kicked in. (CDO is a lot like OCD, only the letters are in the correct alphabetical order as they should be. 😁)

  • @proto.roborovski
    @proto.roborovski 5 дней назад

    Lovely build! The robot came out spectacular for being some car parts!

  • @brianfpv623
    @brianfpv623 5 дней назад

    Wow I’m trying that in my shed tomorrow! Thanks great idea 😊😊😊😊

  • @Half_of_The_World
    @Half_of_The_World 5 дней назад

    ngl I'd have just kept the cars and then used everything else (I really need to stop collecting diecast cars)

    • @BPCustomCreations
      @BPCustomCreations 5 дней назад

      I used to buy a bunch when I was customizing diecast and they are all just sitting around now 😅

    • @Half_of_The_World
      @Half_of_The_World 5 дней назад

      @@BPCustomCreations same, but I never had the strength of will to stop buying them after stopping customising them lol

  • @mikedytham9996
    @mikedytham9996 7 дней назад

    PEW PEW!!! Nice work sir.

  • @Fourwheeljive
    @Fourwheeljive 7 дней назад

    Looks really good! I’ve been using glue to make my paperclip roll bars for my 1/64 FJ40s. It works! I’ve been wanting to use my soldering iron. Seeing your build has given me the bug to use the iron. You made a great, easy to watch and do it yourself video. Subscribed! Best wishes, Robert

  • @ElAhrem
    @ElAhrem 7 дней назад

    This is an amazing build - I really need to have a go at doing a paper clip roll cage now... Very inspirational - consider me a new sub!

    • @BPCustomCreations
      @BPCustomCreations 6 дней назад

      Copper or brass might be better but give it a go 😁👍

  • @ScaleModelGeek
    @ScaleModelGeek 8 дней назад

    That base is fantastic. I'll be stealing that technique. 😂😂

  • @thiughtsnscribbles
    @thiughtsnscribbles 10 дней назад

    Great build!

  • @paulpisters668
    @paulpisters668 11 дней назад

    I had an idea for a build in my garden but my wife won’t let me, maybe you can. It’s a door/hatch to enter an underground “city”. It has to look like a manhole or tank door but larger and sci fi looking.

    • @BPCustomCreations
      @BPCustomCreations 10 дней назад

      That sounds like a fun idea. Maybe you can make a small one somewhere?

  • @diyfireking
    @diyfireking 11 дней назад

    This turned is cool 😍😍

  • @PKTCrafts
    @PKTCrafts 13 дней назад

    I had no idea this was made from cars, sick!

  • @geoffersongeofferies477
    @geoffersongeofferies477 13 дней назад

    I’ve been waiting for this video since I watched Jim pack up the box! Boy, you sure didn’t disappoint!!! Incredible work, as always! The detail is just plain absurd!

    • @BPCustomCreations
      @BPCustomCreations 13 дней назад

      I definitely failed the timed aspect of the challenge but I think Jim let me off the hook on that part 😅 Thanks for the kind comments and the support!!

  • @GrinchWitch
    @GrinchWitch 13 дней назад

    Absolutely Amazing!!!! Final creation was no where in my concept of what could be created from that box of 'stuff'. Happy it made it past Customs without issues LOL Master level skill you have there!!!

  • @CosmicQuestHobbies
    @CosmicQuestHobbies 13 дней назад

    That was a fun build, I enjoyed seeing what you decided to do with the bits that came in the box!!

  • @grimblethegreat3183
    @grimblethegreat3183 13 дней назад

    After cars dismantled I pressed nine to skip to finished project let out an audible WHOA and restarted vid to see whole thing, ridiculously impressive.

  • @ConjuredCraft
    @ConjuredCraft 14 дней назад

    Easily one of my favourite dioramas and videos. I had no idea that the robot was made using diecast cars when I saw the photo, its absolutely seamless! Also the plaster trick is really handy, need to find a project to use that on. Great work!

    • @BPCustomCreations
      @BPCustomCreations 13 дней назад

      Thank you! It's frustrating at times but I think there is a lot of value in limiting your resources and problem solving

  • @goforitpainting
    @goforitpainting 14 дней назад

    Looks cool.

  • @QujinComicArt
    @QujinComicArt 14 дней назад

    awesome work!

  • @spinafire
    @spinafire 15 дней назад

    3:35 Those look like flanges from the inside of a disposable lighter that hold the hard/foam wick material where the flame is ignited

    • @BPCustomCreations
      @BPCustomCreations 14 дней назад

      You're right! I thought I had seen them somewhere before.

  • @oisinholz
    @oisinholz 15 дней назад

    All black robot definitely give a "Stealth Bot" vibe. A failed assassination attempt I guess? The concrete base looks spectacular, and the guard rail is spot on!

    • @BPCustomCreations
      @BPCustomCreations 14 дней назад

      Thank you so much! I guess he failed his mission...

  • @Alan2E0KVRKing
    @Alan2E0KVRKing 15 дней назад

    Nice build, I really liked the rust staining on the guard rail!

  • @g0r3_j
    @g0r3_j 15 дней назад

    Its amazing

  • @RichardThompsonCA
    @RichardThompsonCA 15 дней назад

    Awesome!

  • @DRToysCreations
    @DRToysCreations 15 дней назад

    Poor guy just went out to get a pack of smokes! 😅

  • @OldManDiecast
    @OldManDiecast 15 дней назад

    Poor robot. Never bothered anyone. LOL........great job Ben

    • @BPCustomCreations
      @BPCustomCreations 15 дней назад

      😂 Thank you! Not a very orthodox Silva Challenge but I had to put my own twist on it 😁👍

    • @OldManDiecast
      @OldManDiecast 15 дней назад

      @BPCustomCreations absolutely. And you killed it. Pun intended. Lol

  • @InakaAdventure
    @InakaAdventure 15 дней назад

    "Plastic Saw" >Its made of metal. Wow bro

  • @cerisekappes580
    @cerisekappes580 15 дней назад

    You definitely nailed this challenge!!!! Really awesome results with cool details ❤😊❤

    • @BPCustomCreations
      @BPCustomCreations 14 дней назад

      Thank you! It wasn't easy but I got there

    • @cerisekappes580
      @cerisekappes580 14 дней назад

      @@BPCustomCreations you are welcome 🤗 Glad you kept going 😊

  • @bjscustoms
    @bjscustoms 15 дней назад

    Fantastic work Ben it definitely turned out amazing.

  • @udorechner6846
    @udorechner6846 15 дней назад

    Very nice build and awesome diorama, but the cars used are nearly unrecognizable. I think this is not what the challenge was planed for.

    • @BPCustomCreations
      @BPCustomCreations 14 дней назад

      Thanks! Using parts from something in a way that they aren't recognizable is what I always aim for so that is a great compliment 👍

  • @chicgeekery
    @chicgeekery 15 дней назад

    I never would have thought to deconstruct a hotwheels for parts. Snrk, now i'm seeing a hotwheels chop shop diorama. And the flexible base to make the broken roadway? *chef's kiss* Great job! Thanks for sharing.

  • @wickedsmallgarage
    @wickedsmallgarage 15 дней назад

    Wow, great job 👏 Very creative and well executed. You really raised the bar. How am I going to follow that?!?

    • @BPCustomCreations
      @BPCustomCreations 14 дней назад

      It's not a competition so just be creative with it 😁👍

  • @jchayes7325
    @jchayes7325 15 дней назад

    Another amazing build is always there Ben you did something with that junk that I thought nobody could do with it but yet it was sent to you and you always do an amazing job keep up the good work have a good one and God bless my friend

    • @BPCustomCreations
      @BPCustomCreations 14 дней назад

      I had no idea what I was doing with it for weeks and then I finally got the guardrail idea

  • @chasonlapointe
    @chasonlapointe 15 дней назад

    What a sad diorama, looks great though!

  • @Onlygloo
    @Onlygloo 15 дней назад

    As a preamble, I would like to make it clear that I really like this achievement. However, if I can be critical, constructively, I hope, I would have two remarks that come to me immediately. First, I find that the absence of feet clashes with the sophisticated aspect of the rest of the robot. Finally, this same character introduces, in his pose, a beginning of verticality that, moreover, is not found anywhere else. I find that it creates an imbalance or rather, an impression of unease. I would have liked to find the presence of a purely vertical main element, like a dead tree or a signpost. There you have it, these were my impressions and, before finishing: Bravo!🤩

    • @BPCustomCreations
      @BPCustomCreations 14 дней назад

      The feet were bothering me for a long time and I just wanted to get something done. There is an insane amount of time that goes into these and I get to a stopping point sometimes

    • @Onlygloo
      @Onlygloo 13 дней назад

      @@BPCustomCreations I can understand that🙂

  • @emilnord
    @emilnord 15 дней назад

    So freaking awesome built. Love it. The broken road, the guard rail, and most of all, the robot. Looks really amazing. Really cool, Diorama!